RMAN Error Codes 8000-8999

PL/SQL programs

8000-8999

RMAN-08000

channel string: copied datafile string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08001

restore not complete
Cause: All of the backup pieces have been successfully applied, but x$dbms_backup_restore indicates that the restore conversation is not complete. This usually means that the backup set contained corrupt data.
Action: Restore the files from a different backup set, if possible. The Recovery Manager CHANGE BACKUPPIECE UNAVAILABLE can be used to prevent Recovery Manager from attempting to restore from the corrupt backup piece(s).

RMAN-08002

starting full resync of recovery catalog
Cause: This is an informational message only.
Action: No action is required.

RMAN-08003

channel string: reading from backup piece string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08004

full resync complete
Cause: This is an informational message only.
Action: No action is required.

RMAN-08005

new incarnation of database registered in recovery catalog
Cause: This is an informational message only.
Action: No action is required.

RMAN-08006

database registered in recovery catalog
Cause: This is an informational message only.
Action: No action is required.

RMAN-08007

channel string: copied datafile copy of datafile string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08008

channel string: starting full datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08009

channel string: starting archive log backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08010

channel string: specifying datafile(s) in backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08011

including current control file in backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08012

including control file copy in backup set
Cause: This is an informational message only.
Action: No action is required.

RMAN-08013

channel string: backup piece string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08014

channel string: specifying archive log(s) in backup set
Cause: This is an informational message only.
Action: No action is required.

RMAN-08015

datafile string switched to datafile copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08016

channel string: starting datafile backupset restore
Cause: This is an informational message only.
Action: No action is required.

RMAN-08017

channel string: starting archive log restore to default destination
Cause: This is an informational message only.
Action: No action is required.

RMAN-08018

channel string: starting archive log restore to user-specified destination
Cause: This is an informational message only.
Action: No action is required.

RMAN-08019

channel string: restoring datafile string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08020

including standby control file in backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08021

channel string: restoring control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08022

channel string: restoring archive log
Cause: This is an informational message only.
Action: No action is required.

RMAN-08023

channel string: restored backup piece string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08025

channel string: copied control file copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08026

channel string: copied archive log
Cause: This is an informational message only.
Action: No action is required.

RMAN-08027

channel string: copied current control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08028

channel string: copy current control file failed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08029

snapshot control file name set to default value: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08030

allocated channel: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08031

released channel: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08032

channel string: recid string stamp string does not match recovery catalog
Cause: The record that identifies the source file for a copy or backup database does not contain the same data as is stored in the recovery catalog.
Action: Perform a full resync and retry the operation. If the problem persists, then contact Oracle.

RMAN-08033

channel string: including datafile copy of datafile string in backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08034

full resync skipped, target database not mounted
Cause: This is an informational message only.
Action: No action is required.

RMAN-08035

partial resync skipped, target database not mounted
Cause: This is an informational message only.
Action: No action is required.

RMAN-08036

channel string: could not create control file record for string string
Cause: The record identifying the named file was no longer present in the target database control file, and repeated attempts to inspect the file were unsuccessful in creating the record. This could be because the circular-reuse section of the control file which holds information about the specified type of file is too small and there is other database activity which is causing the record to be overwritten before it can be used.
Action: Try increasing either the size of the control file circular-reuse section for this file type (datafile copy or archived log, as indicated in the error message, or the control_file_record_keep_time initialization parameter. If neither of those remedies works then contact Oracle.

RMAN-08037

channel string: unexpected validation return code string
Cause: This is an internal error that should never be issued.
Action: Contact Oracle Support.

RMAN-08038

channel string: starting piece string at string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08039

channel string: starting incremental datafile backupset restore
Cause: This is an informational message only.
Action: No action is required.

RMAN-08040

full resync skipped, control file is not current or backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08041

partial resync skipped, control file is not current or backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08042

channel string: copied standby control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08043

channel string: copy standby control file failed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08044

channel string: finished piece string at string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08045

channel string: finished piece string at string with string copies
Cause: This is an informational message only.
Action: No action is required.

RMAN-08046

channel string: starting compressed full datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08047

channel string: starting compressed incremental level string datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08048

channel string: starting incremental level string datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08049

channel string: starting compressed archive log backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08050

cataloged datafile copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08051

cataloged archive log
Cause: This is an informational message only.
Action: No action is required.

RMAN-08052

cataloged control file copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08053

channel string: finished piece string at string with string copies and tag string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08054

starting media recovery
Cause: This is an informational message only.
Action: No action is required.

RMAN-08056

skipping datafile string because it has not changed
Cause: The specified datafile has not had its checkpoint advanced since the previous backup, therefore it does not need a new incremental backup.
Action: This is an informational message only.

RMAN-08057

channel string: backup cancelled because all files were skipped
Cause: All datafiles for this backup were skipped, therefore no backup is created.
Action: This is an informational message only.

RMAN-08058

replicating control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08059

media recovery failed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08060

unable to find archive log
Cause: This is an informational message only.
Action: No action is required.

RMAN-08066

database reset to incarnation string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08070

deleted datafile copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08071

channel string: deleting archive log(s)
Cause: This is an informational message only.
Action: No action is required.

RMAN-08072

deleted control file copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08073

deleted backup piece
Cause: This is an informational message only.
Action: No action is required.

RMAN-08074

crosschecked backup piece: found to be 'string'
Cause: This is an informational message only.
Action: No action is required.

RMAN-08085

created script string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08086

replaced script string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08087

channel string: started backup set validation
Cause: This is an informational message only.
Action: No action is required.

RMAN-08088

applied offline range to datafile string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08089

channel string: specifying datafile(s) to restore from backup set
Cause: This is an informational message only.
Action: No action is required.

RMAN-08090

channel string: starting proxy restore
Cause: This is an informational message only.
Action: No action is required.

RMAN-08091

channel string: specifying datafile(s) for proxy backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08092

channel string: specifying datafile copy of datafile string for proxy backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08093

specifying current control file for proxy backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08094

channel string: specifying datafile(s) for proxy restore
Cause: This is an informational message only.
Action: No action is required.

RMAN-08096

channel string: starting validation of datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08097

channel string: starting validation of archive log backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08099

specifying standby control file for proxy backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08100

channel string: starting proxy validation
Cause: This is an informational message only.
Action: No action is required.

RMAN-08101

channel string: proxy validation complete
Cause: This is an informational message only.
Action: No action is required.

RMAN-08102

channel string: located backup piece: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08103

channel string: could not locate backup piece: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08104

input backupset count=string stamp=string creation_time=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08105

channel string: backup cancelled because no pieces were found
Cause: All backupsets specified has no pieces. Therefore, no backup set is created.
Action: This is an informational message only.

RMAN-08106

channel string: restoring block(s)
Cause: This is an informational message only.
Action: No action is required.

RMAN-08108

channel string: specifying block(s) to restore from backup set
Cause: This is an informational message only.
Action: No action is required.

RMAN-08109

channel string: restored block(s) from backup piece string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08110

failover to next copy of backuppiece
Cause: This is an informational message only.
Action: No action is required.

RMAN-08111

some blocks not recovered: See trace file for details
Cause: Some blocks not recovered due to errors.
Action: See trace file for details of the problem.

RMAN-08112

archivelog failover was done on string, check alert log for more info
Cause: This is an informational message to indicate the server found a corrupted block in an archivelog and had to switch to another archivelog with same logseq in alternate archivelog destination to get corresponding un-corrupted block.
Action: If backup is done with delete input option, nothing needs to be done. Otherwise delete the archivelog that has corrupted block(s) as recovery on applying this log would fail. Alert log contains name of the log that has corrupted block(s).

RMAN-08113

including current SPFILE in backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08114

channel string: restoring SPFILE to PFILE
Cause: This is an informational message only.
Action: No action is required.

RMAN-08115

channel string: restoring SPFILE
Cause: This is an informational message only.
Action: No action is required.

RMAN-08116

output filename is original SPFILE location
Cause: This is an informational message only.
Action: No action is required.

RMAN-08117

channel string: the autobackup does not contain an SPFILE
Cause: The requested autobackup does not contain a SPFILE. This is because the instance was not started with a SPFILE when the autobackup was created.
Action: No action is required. RMAN will try three older autobackups before signaling ORA-19687.

RMAN-08118

WARNING: could not delete the following archived redo log
Cause: The routine deleteArchivedLog() could not delete an archived redo log on the target instance.
Action: Check the accompanying file specification and the associated error messages. The file specification indicates what archived redo log on the target instance RMAN was trying to delete and the error messages indicate why RMAN was unable to delete it. Resolve the problem by first confirming that the archived redo log in question has been backed up, do the deletion manually, and then do a crosscheck so that RMAN is aware of the deletion.

RMAN-08119

skipping backup piece handle string; already exists
Cause: A BACKUP command does not need to backup control file autobackup pieces, because they already exists.
Action: This is an informational message, no action is required.

RMAN-08120

WARNING: archive log not deleted, not yet applied by standby
Cause: This is an informational message to alert the user that an archivelog that should have been deleted was not as it has not been applied to the standby database. The next message identifies the archivelog
Action: Archivelog can be deleted after it has been applied to standby database.

RMAN-08121

keep attributes for the backup are deleted
Cause: This is an informational message only.
Action: No action is required.

RMAN-08122

keep attributes for the backup are changed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08123

keep attributes for the datafile/control file copy are deleted
Cause: This is an informational message only.
Action: No action is required.

RMAN-08124

keep attributes for the datafile/control file copy are changed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08125

keep attributes for the proxy copy are deleted
Cause: This is an informational message only.
Action: No action is required.

RMAN-08126

keep attributes for the proxy copy are changed
Cause: This is an informational message only.
Action: No action is required.

RMAN-08127

cataloged backuppiece
Cause: This is an informational message only.
Action: No action is required.

RMAN-08128

uncataloged backuppiece
Cause: This is an informational message only.
Action: No action is required.

RMAN-08129

failover to piece handle=string tag=string
Cause: This is an informational message to indicate the server found a corrupted block in a piece and had to switch to another copy of piece to get corresponding un-corrupted block.
Action: See alert log for information on corruption block(s) and the name of the piece that has the corrupted block(s).

RMAN-08130

failover to copy on device type string
Cause: This is an informational message to indicate the RMAN could not successfully restore the database using the specified backups. An attempt was made to restore the datafiles/archivelogs/ control file/SPFILE using the same backupset on a different device type.
Action: See accompanying additional error messages indicating the cause of the failover.

RMAN-08131

channel string: specifying datafile copies to recover
Cause: This is an informational message only.
Action: No action is required.

RMAN-08132

WARNING: cannot update recovery area reclaimable file list
Cause: This error should be accompanied by other errors giving the cause of failure to update reclaimable file list.
Action: Check the accompanying error.

RMAN-08133

channel string: the autobackup does not contain a standby control file.
Cause: The requested autobackup did not contain a standby control file.
Action: No action is required, RMAN will try three older autobackups before signaling ORA-19687.

RMAN-08135

some corrupt blocks found during conversion of file string
Cause: While converting the specified file from one platform to another, some corrupt blocks were discovered in the specified file. Details about the corruption have been written to a server trace file.
Action: If these corrupt blocks are unexpected, you may be able to use Block Media Recovery at the source database to fix the problem, then re-convert the files.

RMAN-08136

channel string: deleting incremental backup(s)
Cause: This is an informational message only.
Action: No Action Required.

RMAN-08137

WARNING: archive log not deleted as it is still needed
Cause: An archivelog that should have been deleted was not as it was required by Streams or Data Guard. The next message identifies the archivelog.
Action: This is an informational message. The archivelog can be deleted after it is no longer needed. See the documentation for Data Guard to alter the set of active Data Guard destinations. See the documentation for Streams to alter the set of active streams.

RMAN-08150

created global script string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08151

replaced global script string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08152

global script string written to file string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08153

deleted global script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08154

deleted script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08155

printing stored global script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08156

printing stored script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08157

script string written to file string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08158

executing script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08159

executing global script: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08160

script commands will be loaded from file string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08161

contents of Memory Script:
Cause: This is an informational message only.
Action: No action is required.

RMAN-08162

executing Memory Script
Cause: This is an informational message only.
Action: No action is required.

RMAN-08180

channel string: restore complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08181

media recovery complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08182

channel string: validation complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08183

channel string: block restore complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08184

added temporary file string to tablespace string in control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08185

renamed temporary file string to string in control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08186

temporary file string size altered in control file
Cause: One of temporary file size attributes AUTOEXTEND, MAXSIZE, NEXTSIZE was altered. This is an informational message only.
Action: No action is required.

RMAN-08190

validate found one or more corrupt blocks, see trace file for details
Cause: Backup validate found that one or more blocks were corrupt in the specified datafiles.
Action: See trace file for details on the corrupted blocks. Repair them at your earliest convenience.

RMAN-08300

Run SQL script string on the target platform to create database
Cause: This is an informational message only.
Action: No action is required.

RMAN-08301

Edit init.ora file string. This PFILE will be used to create the database on the target platform
Cause: This is an informational message only.
Action: No action is required.

RMAN-08302

Run RMAN script string on target platform to convert datafiles
Cause: This is an informational message only.
Action: No action is required.

RMAN-08303

To recompile all PL/SQL modules, run utlirp.sql and utlrp.sql on the target platform
Cause: This is an informational message only.
Action: Transport script invokes utlirp.sql and utlrp.sql.

RMAN-08304

To change the internal database identifier, use DBNEWID Utility
Cause: This is an informational message only.
Action: Transport script does not invoke DBNEWID Utility automatically.

RMAN-08305

channel string: starting to check datafiles
Cause: This is an informational message only.
Action: No action is required.

RMAN-08306

channel string: datafile checking complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08500

channel string: sid=string devtype=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08501

output filename=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08503

piece handle=string comment=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08504

input archive log thread=string sequence=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08505

output filename=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08506

input filename=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08507

input datafile copy recid=string stamp=string filename=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08508

archive log destination=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08509

destination for restore of datafile string: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08510

archive log thread=string sequence=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08511

piece handle=string tag=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08512

waiting for snapshot control file enqueue
Cause: This is an informational message only.
Action: No action is required.

RMAN-08513

datafile copy filename=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08514

archive log filename=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08515

archive log filename=string thread=string sequence=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08516

control file copy filename=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08517

backup piece handle=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08518

channel string: scanning control file copy string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08519

channel string: scanning datafile copy string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08520

channel string: scanning archive log string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08521

offline range recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08522

input datafile fno=string name=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08523

restoring datafile string to string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08524

input control file copy name=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08526

channel string: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08527

channel string: starting string proxy datafile backup at string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08528

channel string: proxy copy complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08529

proxy file handle=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08530

piece handle=string tag=string comment=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08531

channel string: proxy copy string is string in media management catalog
Cause: This is an informational message only.
Action: No action is required.

RMAN-08532

channel string: restoring block(s) from datafile copy string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08533

restoring blocks of datafile string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08534

channel string: control file restore from autobackup complete
Cause: This is an informational message only.
Action: No action is required.

RMAN-08535

channel string: looking for autobackup on day: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08536

channel string: autobackup found: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08537

channel string: skipped, autobackup already found
Cause: This is an informational message only.
Action: No action is required.

RMAN-08538

channel string: no autobackup in string days found
Cause: This is an informational message only.
Action: No action is required.

RMAN-08539

backup set key=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08540

channel string: backup set complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08541

channel string: SPFILE restore from autobackup complete
Cause: This is an informational message only.
Action: No action is required.

RMAN-08542

channel string: starting proxy archivelog backup at string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08543

channel string: specifying archivelog(s) for proxy backup
Cause: This is an informational message only.
Action: No action is required.

RMAN-08544

channel string: specifying archivelog(s) for proxy restore
Cause: This is an informational message only.
Action: No action is required.

RMAN-08545

flashback command failed: See trace file for details
Cause: An attempt was made to issue a flashback command which failed due to errors. See trace file for details.
Action: See trace file for details of the problem.

RMAN-08546

channel string: autobackup found in the recovery area
Cause: This is an informational message only.
Action: No action is required.

RMAN-08547

channel string: no autobackups found in the recovery area
Cause: The recovery area does not have desired autobackup.
Action: Check the option UNTIL TIME in case an existing autobackup does satisfy the criteria specified in the restore command. Otherwise, verify the init.ora parameters DB_RECOVERY_FILE_DEST and LOCK_NAME_SPACE to verify whether the recovery area location is set correctly. Note that the parameters can be specified as options to the restore command.

RMAN-08548

recovery area destination: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08549

database name (or database unique name) used for search: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08550

autobackup search outside recovery area not attempted because DBID was not set
Cause: Restore of a control file autobackup was attempted without DBID being set.
Action: If you want to search for autobackup outside recovery area, then specify the DBID of the database using SET DBID.

RMAN-08551

recovering datafile copy fno=string name=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08552

backup and output file names are identical: string
Cause: The backup filename choosen was identical to output file name specified for a restore operation.
Action: This is an informational message only. RMAN will failover to next available backup.

RMAN-08580

channel string: starting datafile copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08581

channel string: datafile copy complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08582

channel string: starting archive copy
Cause: This is an informational message only.
Action: No action is required.

RMAN-08583

channel string: archivelog copy complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08584

copying current control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08585

copying standby control file
Cause: This is an informational message only.
Action: No action is required.

RMAN-08586

output filename=string tag=string recid=string stamp=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08587

input is copy of datafile string: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08588

converted datafile=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08589

channel string: starting datafile conversion
Cause: This is an informational message only.
Action: No action is required.

RMAN-08590

channel string: datafile conversion complete, elapsed time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08591

WARNING: invalid archivelog deletion policy
Cause: An invalid ARCHIVELOG DELETION POLICY was supplied. The archivelog deletion policy was APPLIED but there was no mandatory archivelog destinations.
Action: One of the following: 1) Change archivelog deletion policy using CONFIGURE command 2) Make one or more of standby destination as MANDATORY.

RMAN-08599

channel string: throttle time: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08600

ASM diskgroup to search: string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08601

channel string: autobackup found in ASM diskgroup string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08602

channel string: no autobackups found in ASM diskgroup string
Cause: The specified ASM area does not have desired autobackup.
Action: Check the option UNTIL TIME in case an existing autobackup does satisfy the criteria specified in the restore command. Otherwise, verify the values used for the format of the CONFIGURE CONTROLFILE AUTOBACKUP FORMAT command and DB_UNIQUE_NAME to verify whether the ASM area location is set correctly. Note that the DB_UNIQUE_NAME can be specified as option to the restore command.

RMAN-08603

skipping string; file in use by another process
Cause: The indicated file was not included in the backup because it is part of another restore or delete operation.
Action: No action is required. Wait for the other operation to complete, then retry.

RMAN-08604

skipping string; file deleted from recovery area to reclaim disk space
Cause: The indicated file was not included in the backup because it was deleted from the flash recovery area to reclaim disk space for other operations.
Action: No action is required.

RMAN-08605

channel string: sid=string instance=string devtype=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08606

WARNING: The change tracking file is invalid.
Cause: Backup found changed blocks that were not marked in the change tracking file. See alert log for more information.
Action: Do not use any of the incremental backups taken since the last full backup.

RMAN-08607

List of remote backup files
Cause: RESTORE command detected that one or more remote backup files were required to perform restore operation.
Action: Recall the media from remote site that contains the specified backup files before actual restore operation. The message should be accompanied with the list of remote backup files.

RMAN-08608

Initiated recall for the following list of remote backup files
Cause: This is an informational message displayed when the specified RECALL option of the RESTORE command detected that one or more remote backup files were required to perform the restore operation. The message indicated that RMAN had initiated the request on SBT channel to recall the remote backup files.
Action: No action required.

RMAN-08609

channel string: starting incremental datafile backupset
Cause: This is an informational message only.
Action: No action is required.

RMAN-08610

channel string: restoring datafile string to string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08611

channel string: piece handle=string tag=string
Cause: This is an informational message only.
Action: No action is required.

RMAN-08612

channel string: failover to previous backup
Cause: This is an informational message to indicate the RMAN could not successfully restore the files using the specified backups. An attempt was made to restore the datafiles/archivelogs/ control file/SPFILE using a previous existing backup.
Action: See accompanying additional error messages indicating the cause of the failover.